Popped spline
Spline that has worked out of the channel lets the screen go slack.
Frames, spline and mesh
Aluminum Screen Replacement Done From the Frame Out
Aluminum frames usually outlast the screen inside them. We check the frame, fix what holds the mesh, and install new screen that stays tight.
Free quotes
Satisfaction guarantee
Southwest Florida
Aluminum Screen Replacement at a glance
Aluminum screen replacement is the process of removing old mesh and spline from aluminum screen frames and installing new screen at proper tension. Re-Screening Pro offers this service in Miramar, Lee County and throughout Southwest Florida for pool cages, enclosures, lanais and patios. We inspect the frames, explain a plan, and complete the work. Request a free quote using the form on this page.
- WhoRe-Screening Pro, residential screen repair and rescreening
- WhereNaples to Bradenton, including Lee and Sarasota counties
- How to startRequest a free quote online
Aluminum Screen Replacement
Aluminum Screen Replacement
How aluminum screen systems hold together
Most enclosure and patio screens sit in aluminum frames with a groove, called a channel, along each edge. The mesh is pressed into that channel and locked in place by spline, a flexible cord rolled in on top of it.
The aluminum itself is durable, but the parts around it wear out. Spline hardens and shrinks with sun exposure, fasteners can corrode in humid air, and the mesh gradually weakens. When any of those pieces fail, the screen loosens or tears.
This is why a screen that looks fine from across the yard can still be failing up close. Running a hand along the edge of a panel often reveals spline that has lifted or mesh that has started to pull free, long before an obvious tear appears.
See the difference
What a repaired screen changes
Drag the slider to compare a worn, torn enclosure with the same space after aluminum screen replacement.
- Bugs stay outsideTight mesh with no gaps means mosquitoes and no-see-ums bounce off instead of drifting in.
- Less in the poolLeaves, fronds and debris stay out of the water and off the deck.
- A clear view againNew screen looks crisp and even instead of faded, rippled and patched.
BeforeAfter
Assessment, plan, then the work
Re-Screening Pro
Diagnosing problems in aluminum screen frames
Before aluminum screen replacement, we check each frame for the problems that would cause new screen to fail early. A rescreen is only as good as the frame it sits in.
Most of these issues can be addressed during the job. If a frame problem goes beyond screen work, we will tell you what we found.
- Spline that is brittle, shrunk or popping out of the channel
- Corroded or loose screws at frame joints
- Bent or dented channels that will not grip spline
- Gaps between screen and frame edges
- Mesh that is torn, sagging or sun-damaged
What we look for
Aluminum frame screen problems we fix
Corroded screws
Rusty or loose fasteners let frame members shift and stress the mesh.
Torn mesh
Tears from impacts, pets or age are replaced with fresh screen.
UV-weakened screen
Sun-damaged mesh is replaced before it splits across the panel.
Uneven tension
Panels that are tight on one side and loose on the other are reset evenly.
Mesh upgrades
Heavier or finer mesh options can be discussed for specific areas.
Why Re-Screening Pro
Benefits of professional aluminum rescreening
Every job starts with an honest look at your screens and a clear plan before any work begins.
Request My Free Quote- Screens that stay tight instead of sagging
- Reuse of sound aluminum frames
- Fewer gaps for insects and debris
- A clean, uniform finished look
- Longer life for the full enclosure
- Customer satisfaction guaranteed
Good to know
What a proper rescreen looks like
Old mesh and spline are pulled out and the channels are cleaned. New screen is laid across the frame, rolled in with fresh spline, tensioned evenly and trimmed so no loose edges remain.
Mesh types, including standard fiberglass, no-see-um, pet-resistant and privacy styles, can be discussed during the assessment. All aluminum screen replacement work is backed by our customer satisfaction guarantee.
Why it is worth fixing early
Small tear, bigger problem
Screen damage rarely stays the same size. Here is how a little tear usually grows.
- 01
A small tear
A pinhole, a popped spline or a snag from a branch or pet claw.
- 02
Wind works it open
Every breeze and summer storm pulls on the loose edge.
- 03
The panel lets go
The tear runs, the mesh sags and the panel starts to flap.
- 04
Bugs and debris get in
Now insects, leaves and fronds come right through.
Catching damage early often means a simpler fix, like one panel or a strip of spline, instead of a whole wall.
Our process
Our aluminum rescreening process
From the first look to the finished screen, you know what is happening and why.
Send your request
Fill out the free quote form with a description of your screens and frames.
Frame inspection
We check channels, spline, fasteners and mesh to find the root of the problem.
Repair plan
We explain what needs replacement and discuss mesh choices.
Rescreen the frames
We install new mesh and spline with quality materials and even tension.
Related services
More screen services from Re-Screening Pro
One team for every screened space at your home, from the pool cage to the front door.
Service area
Serving Southwest Florida
Re-Screening Pro provides aluminum screen replacement in Miramar and throughout Lee County, along with our other Southwest Florida service areas.
- Bonita Springs
- Bradenton
- Estero
- Fort Myers
- Immokalee
- Lee County
- Marco Island
- Miramar
- Naples
- North Port
- Punta Gorda
- Sarasota
- Sarasota County
- Venice
Questions
Aluminum Screen Replacement FAQ
Can my existing aluminum frames be reused?
In most cases, yes. If the frames are straight and the channels are in good shape, only the mesh and spline need replacing.
What causes spline to fail?
Sun and heat cause spline to harden and shrink over time. Once it shrinks, it no longer grips the screen firmly in the channel, and the mesh loosens.
Why do the screws on my frame look rusty?
Humid, salty air can cause fasteners to corrode. Corroded screws may loosen and let the frame shift, so we check them during the assessment.
Can I choose a different mesh when you rescreen?
Often, yes. Options like pet-resistant, no-see-um or privacy-style screens can be discussed during the assessment.
How do I request service?
Use the free quote form on this page. We will follow up to arrange an on-site assessment.
Free quote
Give your aluminum frames new screen
Fill out the form for a free quote and a clear plan for your aluminum screen replacement.
- Tell us about your screensA short form: a few details and a way to reach you.
- We set up an assessmentWe look at the damage in person and explain the plan.
- You decideNo obligation. Your quote is free.
Ready when you are
Aluminum screen replacement in Miramar and Lee County. Re-Screening Pro rescreens aluminum frames and fixes loose spline. Get your free quote online now.