Wind-blown panels
Panels pulled out of their channels or torn by storm debris are reset or replaced.
Diagnose the damage first
Pool Cages Screen Repair That Targets the Cause
A hole in a cage panel is a symptom. We find out whether it came from wind, fronds, pets or aging mesh, then repair it accordingly.
Free quotes
Satisfaction guarantee
Southwest Florida
Pool Cages Screen Repair at a glance
Pool cages screen repair means replacing torn or loose mesh, resetting spline and fixing hardware on the screened enclosure around your pool. Re-Screening Pro performs this work in Fort Myers, Lee County, Immokalee and across Southwest Florida. We inspect the cage, explain a repair plan, then complete the repair, from one panel to the whole cage. Start with a free quote using the form on this page.
- WhoRe-Screening Pro, residential screen repair and rescreening
- WhereNaples to Bradenton, including Lee and Sarasota counties
- How to startRequest a free quote online
Pool Cages Screen Repair
Pool Cages Screen Repair
Read the damage: what each type of tear tells you
The shape and location of the damage usually points straight to the cause. A clean slice in a roof panel often means a palm frond or flying branch. Ragged holes low on the walls are typical of pets. Splits that run along the edge of a panel usually mean the mesh is tired from sun exposure.
Panels that billow or sag without any visible tear point to spline that has shrunk or popped out of the channel. Rust streaks near fasteners suggest corroded screws, which can let the frame loosen over time.
Knowing the cause matters because the right fix is different for each. Replacing a pet-torn panel with the same light mesh may just mean another tear next season.
See the difference
What a repaired screen changes
Drag the slider to compare a worn, torn enclosure with the same space after pool cages screen repair.
- Bugs stay outsideTight mesh with no gaps means mosquitoes and no-see-ums bounce off instead of drifting in.
- Less in the poolLeaves, fronds and debris stay out of the water and off the deck.
- A clear view againNew screen looks crisp and even instead of faded, rippled and patched.
BeforeAfter
Assessment, plan, then the work
Re-Screening Pro
Repair or replace? A practical checklist
Most homeowners want to know whether pool cages screen repair will be enough or whether the whole cage needs rescreening. Here is the same checklist we use during an inspection.
If most of your answers fall on the replace side, a full rescreen often makes more sense than repeated spot repairs. Either way, we will show you what we see and let you decide.
- Damage limited to a few panels: repair is usually the right call
- Mesh flexes and feels soft: the screen still has life in it
- Mesh is chalky, faded or cracks when pressed: plan on replacement
- Tears keep appearing in new spots: the material is likely failing
- Frame is solid with tight fasteners: rescreening alone may be enough
What we look for
Problems we fix on pool cages
Frond punctures
Roof panels sliced by falling palm fronds are replaced with new mesh and spline.
Pet damage
Lower panels clawed or pushed out by pets can be replaced, with tougher mesh options discussed.
Sun-weakened mesh
Brittle, chalky screen that splits easily is replaced before it fails across the cage.
Loose, sagging screens
Shrunk or popped spline is replaced so the panel sits tight again.
Corroded fasteners
Rusted or loose screws are flagged so the frame stays secure.
Why Re-Screening Pro
Why fixing it now pays off
Every job starts with an honest look at your screens and a clear plan before any work begins.
Request My Free Quote- Bugs and lizards stay out of the pool area
- Fewer leaves and debris in the water
- Small tears do not spread into bigger ones
- The cage looks cared for, not neglected
- The enclosure lasts longer overall
- Backed by our customer satisfaction guarantee
Good to know
What happens during the repair
Damaged mesh is removed from the frame channel and the old spline is pulled out. New screen is set in place, rolled in with fresh spline and tensioned so it sits flat and tight.
While we are there, we check neighboring panels, door hardware and fasteners. If a screw is corroded or a channel is damaged, we will point it out so small problems do not turn into the next repair.
Mesh options, such as heavier pet-resistant screen for lower panels, can be discussed during the assessment.
Why it is worth fixing early
Small tear, bigger problem
Screen damage rarely stays the same size. Here is how a little tear usually grows.
- 01
A small tear
A pinhole, a popped spline or a snag from a branch or pet claw.
- 02
Wind works it open
Every breeze and summer storm pulls on the loose edge.
- 03
The panel lets go
The tear runs, the mesh sags and the panel starts to flap.
- 04
Bugs and debris get in
Now insects, leaves and fronds come right through.
Catching damage early often means a simpler fix, like one panel or a strip of spline, instead of a whole wall.
Our process
How a pool cage repair job runs
From the first look to the finished screen, you know what is happening and why.
Send the details
Use the free quote form to tell us which panels are damaged and what you think caused it.
Walk the cage
We inspect mesh, spline, frame channels, fasteners and doors on site.
Agree on a plan
You get a plain explanation of what needs repair and whether a full rescreen is worth considering.
Repair and clean up
We replace the damaged screen, tension it properly and leave the pool area tidy.
Related services
More screen services from Re-Screening Pro
One team for every screened space at your home, from the pool cage to the front door.
Service area
Serving Southwest Florida
We handle pool cages screen repair for homeowners in Fort Myers, Immokalee and the rest of Lee County, along with other Southwest Florida communities.
- Bonita Springs
- Bradenton
- Estero
- Fort Myers
- Immokalee
- Lee County
- Marco Island
- Miramar
- Naples
- North Port
- Punta Gorda
- Sarasota
- Sarasota County
- Venice
Questions
Pool Cages Screen Repair FAQ
Can a small tear be patched instead of replacing the panel?
Patches can work as a stopgap on a tiny hole, but they tend to show and can loosen over time. Replacing the panel gives a cleaner, longer-lasting result. We will tell you which makes sense for your cage.
Why does my new screen keep tearing in the same spot?
Repeat tears usually have a repeat cause, such as a pet's favorite spot, a branch that rubs in the wind, or a damaged frame edge. Finding and addressing that cause is part of the inspection.
Will the new panels match the old ones?
New mesh is often darker and cleaner than aged screen next to it. If your cage is heavily faded, we can talk about whether rescreening more panels gives you a more even look.
Do you check the frame during a screen repair?
Yes. We look at channels, fasteners and doors because loose or corroded hardware can cause screens to fail again.
How do I schedule an inspection?
Fill out the free quote form on this page and we will reach out to set up an on-site assessment.
Free quote
Stop the tear before it spreads
Send us the details through the form and get a free quote for your pool cage repair.
- Tell us about your screensA short form: a few details and a way to reach you.
- We set up an assessmentWe look at the damage in person and explain the plan.
- You decideNo obligation. Your quote is free.
Ready when you are
Pool cages screen repair in Fort Myers and Lee County. Re-Screening Pro finds the cause of tears and sags and fixes it. Request your free quote online.