Flapping panels
A panel that moves in the wind has lost its grip on the frame and will likely tear free.
After the storm passes
Pool Enclosure Screen Repair After Storms and Sun
Wind, flying debris and years of UV take a toll on screened pool enclosures. We sort out what can be repaired and what needs replacing.
Free quotes
Satisfaction guarantee
Southwest Florida
Pool Enclosure Screen Repair at a glance
Pool enclosure screen repair restores the mesh panels on a screened pool area after tears, storm damage, sagging or sun wear. Re-Screening Pro serves Naples, Punta Gorda and the wider Southwest Florida region. We assess the enclosure on site, explain a repair plan, and then carry out anything from a single panel replacement to a complete rescreen. Request a free quote with the form on this page.
- WhoRe-Screening Pro, residential screen repair and rescreening
- WhereNaples to Bradenton, including Lee and Sarasota counties
- How to startRequest a free quote online
Pool Enclosure Screen Repair
Pool Enclosure Screen Repair
A post-storm checklist for your pool enclosure
After a strong wind event, take a slow walk around the enclosure before anyone uses the pool. Storm damage is not always obvious from the lanai door, and a panel that is only partly loose can tear free in the next gust.
If you find anything on this list, it is worth having the enclosure looked at. Do not climb on the structure or try to push panels back in from a ladder.
- Panels pulled out of their frame channels or flapping
- Punctures and slices from branches or fronds
- Debris resting on roof panels and stretching the mesh
- Doors that no longer close or latch properly
- Loose, missing or bent fasteners along the frame
See the difference
What a repaired screen changes
Drag the slider to compare a worn, torn enclosure with the same space after pool enclosure screen repair.
- Bugs stay outsideTight mesh with no gaps means mosquitoes and no-see-ums bounce off instead of drifting in.
- Less in the poolLeaves, fronds and debris stay out of the water and off the deck.
- A clear view againNew screen looks crisp and even instead of faded, rippled and patched.
BeforeAfter
Assessment, plan, then the work
Re-Screening Pro
When the damage is slow instead of sudden
Not every problem comes from a storm. Florida sun and humidity break down screen mesh gradually, and eventually the fabric turns brittle and splits with very little pressure.
You may also notice panels going loose and wavy. That is usually the spline shrinking and hardening in its channel, which lets the mesh slip. Corroded screws can add to the problem by letting frame members shift slightly.
These issues are easy to fix early and much harder to ignore later, because one failing panel tends to put extra stress on its neighbors.
What we look for
Signs your pool enclosure needs attention
Storm punctures
Holes from flying debris let in bugs and get larger with every breeze.
Faded, chalky mesh
Sun-damaged screen loses strength and splits easily when touched.
Sagging roof screens
Roof panels that dip or hold water and debris usually have failing spline.
More bugs inside
If insects are suddenly a problem by the pool, there is an opening somewhere.
Sticking screen door
Doors that drag or will not latch can leave a gap and wear out faster.
Why Re-Screening Pro
What you get from a sound enclosure
Every job starts with an honest look at your screens and a clear plan before any work begins.
Request My Free Quote- Protection from insects, lizards and pool debris
- Safer use of the pool area after storm season
- A cleaner, more inviting backyard
- Added curb appeal and property value
- Longer life for the enclosure structure
- Timely, professional service
Good to know
How we repair pool enclosure screens
Our pool enclosure screen repair starts with an inspection of every wall and roof panel, plus the doors and fasteners. We separate the panels that need replacement now from those that are still sound.
Damaged screens are removed, the channels are cleaned out, and new mesh is installed with fresh spline at proper tension. Mesh types, such as standard fiberglass or finer no-see-um screen, can be discussed during the assessment.
Why it is worth fixing early
Small tear, bigger problem
Screen damage rarely stays the same size. Here is how a little tear usually grows.
- 01
A small tear
A pinhole, a popped spline or a snag from a branch or pet claw.
- 02
Wind works it open
Every breeze and summer storm pulls on the loose edge.
- 03
The panel lets go
The tear runs, the mesh sags and the panel starts to flap.
- 04
Bugs and debris get in
Now insects, leaves and fronds come right through.
Catching damage early often means a simpler fix, like one panel or a strip of spline, instead of a whole wall.
Our process
Our four-step repair process
From the first look to the finished screen, you know what is happening and why.
Tell us what happened
Describe the damage in the free quote form, including whether it followed a storm.
Full enclosure inspection
We check every panel, the doors and the fasteners, not just the obvious hole.
Repair plan explained
You get a straightforward plan that separates urgent repairs from items to watch.
Repair completed
We replace damaged screens with quality materials and leave the pool area clean.
Related services
More screen services from Re-Screening Pro
One team for every screened space at your home, from the pool cage to the front door.
Service area
Serving Southwest Florida
Re-Screening Pro provides pool enclosure screen repair in Naples and Punta Gorda, and throughout the Southwest Florida communities in between.
- Bonita Springs
- Bradenton
- Estero
- Fort Myers
- Immokalee
- Lee County
- Marco Island
- Miramar
- Naples
- North Port
- Punta Gorda
- Sarasota
- Sarasota County
- Venice
Questions
Pool Enclosure Screen Repair FAQ
Should I wait until hurricane season is over to repair my enclosure?
An open or loose panel can catch wind and tear further, so it is usually better not to wait. Getting damage repaired early also keeps debris and pests out in the meantime.
Can you repair just the roof panels?
Yes. Roof panels often take the brunt of falling fronds and debris, and they can be replaced without rescreening the walls if the wall mesh is still in good shape.
How does failing spline cause a sagging enclosure?
Spline is the flexible cord that presses the screen into the aluminum frame channel. When it shrinks or hardens with age, the screen loosens and sags, so fresh spline is part of a lasting repair.
Is a full rescreen always better than repair?
No. If damage is limited and the remaining mesh is healthy, repair is the practical choice. A full rescreen makes more sense when most of the screen is sun-damaged.
How do I get a pool enclosure screen repair quote started?
Fill out the free quote form on this page and we will contact you to set up an assessment.
Free quote
Get your pool enclosure back in shape
Use the form to request a free quote. We will inspect the enclosure and give you a clear repair plan.
- Tell us about your screensA short form: a few details and a way to reach you.
- We set up an assessmentWe look at the damage in person and explain the plan.
- You decideNo obligation. Your quote is free.
Ready when you are
Pool enclosure screen repair in Naples and Punta Gorda. Re-Screening Pro fixes storm tears, sagging panels and worn mesh. Ask for a free quote today.